UHF uplink/UHF downlink Full Duplex Transceiver
Price on request
- Full duplex communication
- Data rate re-configurable in-flight
- FM transponder mode available
- Safety watchdog
- Low power consumption
- Single PCB radio
- Single board Telemetry, Telecommand and Beacon capabilities
Description
The ISISPACE UHF uplink/UHF downlink transceiver is a full-duplex communication system for CubeSat TT&C applications. The radio can operate in commercial bands of the UHF frequency spectrum. It is low power, low mass, and highly configurable, offering the flexibility of changing data rates and frequencies in flight. This radio is tailored for CubeSat missions and cross-compatible with other subsystems such as onboard computers and antenna systems.
Specifications
Dimensions: | 90 x 96 x 15 mm |
Mass: | 75g |
Supply voltage range: | 6.5 – 20 V DC |
Power consumption: | 0.48W (receiver only)
4 W (transmitter on) |
Operating temperature: | -20 to +60 deg C |
RF interfaces: | MMCX (50 ohm) |
Data interfaces: | I²C |
Transmitter
Frequency range: | 267-273 MHz |
Transmit power:
Modulation options: |
27 dBm
Binary Phase Shift Keying (BPSK) with G3RUH scrambling |
Data rate selectable: | 1200, 2400, 4800 and 9600 bps |
Datalink layer protocol: | AX.25 or HDLC |
Receiver
Frequency range: | 312-322 MHz |
Modulation: | Frequency Shift Keying (FSK) with G3RUH scrambling |
Data rate: | 9600 bps |
Sensitivity: | -104 dBm Sensitivity for BER 1E-5 |
Datalink layer protocol | AX.25 or HDLC |
Configuration
- Receiver/Transmitter operating frequency
- Downlink data rate
- Custom beacon message (AX.25)
- CSKB connector type and location
- RF connector position and orientation
- I²C watchdog implementation